OTHOTIC DESIGN ‘ULTRA SUPPORT’ REPLACEMENT INNERSOLES

“Maximum Support For Working Feet”

This insole’s unique design starts with the TPU Stabiliser Shell which provides a supportive yet flexible foundation for feet during walking and standing. The Shell is specially bonded to the polyurethane carriage to integrate into the insole’s exterior shape. The Stabiliser Shell is more than half the length of the footbed, and adds support, strength and stability, while not inhibiting the healthy freedom of natural foot mechanics. The shell’s thickness, and material density, have been designed to accommodate proper fit of the insole from foot to foot and shoe to shoe.

The upper carriage is constructed from High Impact Polyurethane (HIP) to absorb the foot’s weight and to cushion its step. The ‘HIP’ has excellent rebound characteristics to launch the next step and reduce fatigue. The material’s density and compression features add durability and helps the footbed maintain its original thickness and design characteristics, even after extended wear. The ‘HIP’ is odor inhibiting, anti-bacterial, and anti-fungal for better foot health and comfort.

The carriage has a breathable, anti-microbial polyester top covering for maximum comfort and foot health. The fabric is breathable which circulates air throughout the shoe and ventilates the feet. The fabric is odor inhibiting, anti-bacterial, and anti-fungal. Its porous texture wicks away moisture for better foot health and comfort.

The arch area prevents fallen arch problems and holds the foot in its natural alignment for added stability.

The insole’s deep cushioned heel cup is supported by the TPU Stabiliser Shell and has sidewalls that contour to the natural shape of the foot. It also has an embedded gel heel pad to reduce heel shock. The density of the TPU material provides deep cushioning so the heel cup can absorb shock forces with each step taken. The heel cup’s sidewalls are firmer from the added support and cradling of the Outer TPU Stabiliser Shell. This positions, and stabilizes the heel to reduce friction that results from lateral foot movement.

The heel cup has a shock absorbing gel plug which passes through the top and bottom surfaces for additional support and cushioning. This allows the insole to give the lowest part of the heel, the most amount of cushioning.

Sizing (Trim as required)

Small – UK 5-7 (US 6-8)

Medium – UK 8-10 (US 9-11)

Large – UK 11-13 (US 12-14)

Directions to trim:

Insert into shoes or boots after removing existing insoles. Wear for a few hours each day until feet adjust to correction. Then wear full time. Hand wash in warm water and air dry.

The Boot Warehouse has a 30-day return policy.  
To create a new return, begin by calling us on 02 9524 6188 and request a pre-paid return label. This will cost $16.95 or $20 for two pairs and can be paid over the phone. You can also request a return by emailing admin@tbwsafety.com.au. We will reply with a PayPal link in which you can deposit the amount for your return.

This payment covers the cost of the postage of your item back to our warehouse and the cost of your new item back out to you or a refund in full. This saves you from having to pay general public postage rates to return your item. You will then receive your label via email to print and attach to your return. The cost of returning a pair from New Zealand is $30.00.

To complete your return please follow the following steps:

1. Have your order number handy and phone us on 02 9524 6188 and request a pre-paid label and pay the $16.95 over the phone. You will then receive your label via email shortly after.
2. Print the returns form or use the one included with your delivery and include it in the box – Click to print the RETURNS FORM
3. Ensure your item for return is in its original box which is packed back into a satchel to protect the box and item on its return
4. Print and attach the pre-paid label onto the satchel
5. Drop the parcel off to your nearest Australia Post office
6. Keep an eye on your e-mails for return updates

Important 

Please ensure your item for return is in its original box or be sure that the original tags on the clothing have not been removed from your clothing. Your return will also only be accepted if you place your return back into the reusable satchel your item arrived in or any packaging, for example, wrapping paper or newspaper. Ensure that your return label is then placed onto the packaging and not directly onto the shoebox. This is an important step as we need to re-sell the style you are returning. If you do not complete this step, we are unable to accept and process your return.

If you paid by Pay Pal, they offer a partial refund of the return cost. For instructions on how to take advantage please click here.

Your parcel will take up to 4 days to be delivered back to our warehouse. If you have completed each of the above steps your return will be processed, dispatched or refunded if requested on the same day it is received here in the warehouse.

Have any further questions? 
Please email us at returns@tbwsafety.com.au or phone us on 02 9524 6188

International returns (excluding NZ):
All postage and handling costs will be incurred by the customer. If you return your item for a change of size, you must pay for the re-postage of your new item. The re-postage cost will be the same as what you originally paid and can be found on your invoice. If you are returning your item for a refund, please know you will be refunded the cost of your item only, excluding any postage originally paid. Please CLICK HERE to print a copy of our international (excluding NZ) return form.   

CLAIMS FOR MANUFACTURER FAULTS

All of the footwear we sell is new to stock and covered by the manufactures 6-month warranty. If you find yourself in the unfortunate situation of needing to make a claim for a quality issue please follow these steps;

1. Check your item is still within its warranty time frame of 6 months. 
2. Email our warranty department at returns@tbwsafety.com.au with your order number, a description, and 2 clear images of the fault. If any further information or images are required, we will let you know via reply.
3. We will confirm we have received your email and advise you of the outcome. We will sometimes forward the images to the manufacturer for their advice. 

If the manufacturer agrees that your boot contains a manufacturing fault, we will issue you with a new pair straight away at our cost and provide you with a returns label which is pre-paid to return your faulty footwear. 

In some cases, the boot will be required to be returned for further inspection before a decision can be made. Our returns department will advise you if this is required. Under no circumstances will we replace a faulty item with a size change. WARRANTY RETURNS FORM

30-DAY COMFORT GUARANTEE

To return a pair under a comfort guarantee, please follow the following steps. Please note, your item will need to be returned at your own cost.

1) The brands that offer a 30-day comfort guarantee are Oliver, Blundstone and Steel Blue.
2) Your purchase must be returned within 30 days from the date of receipt
3) Please include your receipt and a completed copy of the 30 DAY COMFORT GUARANTEE FORM
4) Return the package to the following address at your own cost

The Boot Warehouse 
Unit 20, 20-28 Kareena Rd 
Miranda NSW 2228

Under no circumstances will we replace a 30-day comfort guarantee return for a change of size. In most cases, a refund will be offered, or a change of style can be discussed as an option.

PRE ORDER ITEMS

The Boot Warehouse does not accept returns on pre-order items. 
Customers should only purchase this item if they have previously owned a pair and know their size.

TBW Orthotic Design Innersoles. ULTRA SUPPORT Replacement Insoles For Work Boots

$12.95
Clear
Compare

OTHOTIC DESIGN ‘ULTRA SUPPORT’ REPLACEMENT INNERSOLES

“Maximum Support For Working Feet”

This insole’s unique design starts with the TPU Stabiliser Shell which provides a supportive yet flexible foundation for feet during walking and standing. The Shell is specially bonded to the polyurethane carriage to integrate into the insole’s exterior shape. The Stabiliser Shell is more than half the length of the footbed, and adds support, strength and stability, while not inhibiting the healthy freedom of natural foot mechanics. The shell’s thickness, and material density, have been designed to accommodate proper fit of the insole from foot to foot and shoe to shoe.

The upper carriage is constructed from High Impact Polyurethane (HIP) to absorb the foot’s weight and to cushion its step. The ‘HIP’ has excellent rebound characteristics to launch the next step and reduce fatigue. The material’s density and compression features add durability and helps the footbed maintain its original thickness and design characteristics, even after extended wear. The ‘HIP’ is odor inhibiting, anti-bacterial, and anti-fungal for better foot health and comfort.

The carriage has a breathable, anti-microbial polyester top covering for maximum comfort and foot health. The fabric is breathable which circulates air throughout the shoe and ventilates the feet. The fabric is odor inhibiting, anti-bacterial, and anti-fungal. Its porous texture wicks away moisture for better foot health and comfort.

The arch area prevents fallen arch problems and holds the foot in its natural alignment for added stability.

The insole’s deep cushioned heel cup is supported by the TPU Stabiliser Shell and has sidewalls that contour to the natural shape of the foot. It also has an embedded gel heel pad to reduce heel shock. The density of the TPU material provides deep cushioning so the heel cup can absorb shock forces with each step taken. The heel cup’s sidewalls are firmer from the added support and cradling of the Outer TPU Stabiliser Shell. This positions, and stabilizes the heel to reduce friction that results from lateral foot movement.

The heel cup has a shock absorbing gel plug which passes through the top and bottom surfaces for additional support and cushioning. This allows the insole to give the lowest part of the heel, the most amount of cushioning.

Sizing (Trim as required)

Small – UK 5-7 (US 6-8)

Medium – UK 8-10 (US 9-11)

Large – UK 11-13 (US 12-14)

Directions to trim:

Insert into shoes or boots after removing existing insoles. Wear for a few hours each day until feet adjust to correction. Then wear full time. Hand wash in warm water and air dry.

The Boot Warehouse has a 30-day return policy.  
To create a new return, begin by calling us on 02 9524 6188 and request a pre-paid return label. This will cost $16.95 or $20 for two pairs and can be paid over the phone. You can also request a return by emailing admin@tbwsafety.com.au. We will reply with a PayPal link in which you can deposit the amount for your return.

This payment covers the cost of the postage of your item back to our warehouse and the cost of your new item back out to you or a refund in full. This saves you from having to pay general public postage rates to return your item. You will then receive your label via email to print and attach to your return. The cost of returning a pair from New Zealand is $30.00.

To complete your return please follow the following steps:

1. Have your order number handy and phone us on 02 9524 6188 and request a pre-paid label and pay the $16.95 over the phone. You will then receive your label via email shortly after.
2. Print the returns form or use the one included with your delivery and include it in the box – Click to print the RETURNS FORM
3. Ensure your item for return is in its original box which is packed back into a satchel to protect the box and item on its return
4. Print and attach the pre-paid label onto the satchel
5. Drop the parcel off to your nearest Australia Post office
6. Keep an eye on your e-mails for return updates

Important 

Please ensure your item for return is in its original box or be sure that the original tags on the clothing have not been removed from your clothing. Your return will also only be accepted if you place your return back into the reusable satchel your item arrived in or any packaging, for example, wrapping paper or newspaper. Ensure that your return label is then placed onto the packaging and not directly onto the shoebox. This is an important step as we need to re-sell the style you are returning. If you do not complete this step, we are unable to accept and process your return.

If you paid by Pay Pal, they offer a partial refund of the return cost. For instructions on how to take advantage please click here.

Your parcel will take up to 4 days to be delivered back to our warehouse. If you have completed each of the above steps your return will be processed, dispatched or refunded if requested on the same day it is received here in the warehouse.

Have any further questions? 
Please email us at returns@tbwsafety.com.au or phone us on 02 9524 6188

International returns (excluding NZ):
All postage and handling costs will be incurred by the customer. If you return your item for a change of size, you must pay for the re-postage of your new item. The re-postage cost will be the same as what you originally paid and can be found on your invoice. If you are returning your item for a refund, please know you will be refunded the cost of your item only, excluding any postage originally paid. Please CLICK HERE to print a copy of our international (excluding NZ) return form.   

CLAIMS FOR MANUFACTURER FAULTS

All of the footwear we sell is new to stock and covered by the manufactures 6-month warranty. If you find yourself in the unfortunate situation of needing to make a claim for a quality issue please follow these steps;

1. Check your item is still within its warranty time frame of 6 months. 
2. Email our warranty department at returns@tbwsafety.com.au with your order number, a description, and 2 clear images of the fault. If any further information or images are required, we will let you know via reply.
3. We will confirm we have received your email and advise you of the outcome. We will sometimes forward the images to the manufacturer for their advice. 

If the manufacturer agrees that your boot contains a manufacturing fault, we will issue you with a new pair straight away at our cost and provide you with a returns label which is pre-paid to return your faulty footwear. 

In some cases, the boot will be required to be returned for further inspection before a decision can be made. Our returns department will advise you if this is required. Under no circumstances will we replace a faulty item with a size change. WARRANTY RETURNS FORM

30-DAY COMFORT GUARANTEE

To return a pair under a comfort guarantee, please follow the following steps. Please note, your item will need to be returned at your own cost.

1) The brands that offer a 30-day comfort guarantee are Oliver, Blundstone and Steel Blue.
2) Your purchase must be returned within 30 days from the date of receipt
3) Please include your receipt and a completed copy of the 30 DAY COMFORT GUARANTEE FORM
4) Return the package to the following address at your own cost

The Boot Warehouse 
Unit 20, 20-28 Kareena Rd 
Miranda NSW 2228

Under no circumstances will we replace a 30-day comfort guarantee return for a change of size. In most cases, a refund will be offered, or a change of style can be discussed as an option.

PRE ORDER ITEMS

The Boot Warehouse does not accept returns on pre-order items. 
Customers should only purchase this item if they have previously owned a pair and know their size.

OTHOTIC DESIGN ‘ULTRA SUPPORT’ REPLACEMENT INNERSOLES

“Maximum Support For Working Feet”

This insole’s unique design starts with the TPU Stabiliser Shell which provides a supportive yet flexible foundation for feet during walking and standing. The Shell is specially bonded to the polyurethane carriage to integrate into the insole’s exterior shape. The Stabiliser Shell is more than half the length of the footbed, and adds support, strength and stability, while not inhibiting the healthy freedom of natural foot mechanics. The shell’s thickness, and material density, have been designed to accommodate proper fit of the insole from foot to foot and shoe to shoe.

The upper carriage is constructed from High Impact Polyurethane (HIP) to absorb the foot’s weight and to cushion its step. The ‘HIP’ has excellent rebound characteristics to launch the next step and reduce fatigue. The material’s density and compression features add durability and helps the footbed maintain its original thickness and design characteristics, even after extended wear. The ‘HIP’ is odor inhibiting, anti-bacterial, and anti-fungal for better foot health and comfort.

The carriage has a breathable, anti-microbial polyester top covering for maximum comfort and foot health. The fabric is breathable which circulates air throughout the shoe and ventilates the feet. The fabric is odor inhibiting, anti-bacterial, and anti-fungal. Its porous texture wicks away moisture for better foot health and comfort.

The arch area prevents fallen arch problems and holds the foot in its natural alignment for added stability.

The insole’s deep cushioned heel cup is supported by the TPU Stabiliser Shell and has sidewalls that contour to the natural shape of the foot. It also has an embedded gel heel pad to reduce heel shock. The density of the TPU material provides deep cushioning so the heel cup can absorb shock forces with each step taken. The heel cup’s sidewalls are firmer from the added support and cradling of the Outer TPU Stabiliser Shell. This positions, and stabilizes the heel to reduce friction that results from lateral foot movement.

The heel cup has a shock absorbing gel plug which passes through the top and bottom surfaces for additional support and cushioning. This allows the insole to give the lowest part of the heel, the most amount of cushioning.

Sizing (Trim as required)

Small – UK 5-7 (US 6-8)

Medium – UK 8-10 (US 9-11)

Large – UK 11-13 (US 12-14)

Directions to trim:

Insert into shoes or boots after removing existing insoles. Wear for a few hours each day until feet adjust to correction. Then wear full time. Hand wash in warm water and air dry.

Weight 3.0 kg
Size

Large UK 11-13 / US 12-14, Medium UK 8-10 / US 9-11, Small UK 5-7 / US 6-8

Colour

Department

Men

Style

Work Boot Insoles

Type

Inner

Upper Material

Fabric

Brand

TB@W

Shoe Type

Insoles

Condition

New with box

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.